Pulsar Audio is having a Pre-Black Friday Sale. Up to 70% OFF on popular compressor “Mu” and more

359

Pulsar Audio is having a Pre-Black Friday Sale. Up to 70% OFF on popular compressor “Mu” and more.

Mu

The most faithful emulation of a modern yet legendary tube compressor/limiter – perfect glue for mixing and mastering.

Pulsar’s modelling technology guarantees a perfect emulation of the behaviour of the original device.

From the saturation of the magnetic flux in the transformers to the precise response of the tubes, to the effect of the tiny calibration defects, everything is perfectly reproduced.

One of the major points is the low CPU load while ensuring high quality.

The Pulsar team spent a ridiculous amount of time optimizing the processing so that it consumes very few system resources despite the very complex algorithm inside. The Pulsar Mu takes full advantage of the CPU’s features to do more with less. But if your computer can stand it and you enjoy making it suffer, you can always turn over-sampling on and process at up to 384 kHz!

There seems to be no need to add too much, which is often the case with high quality plug-in effects. Of course, you can add too much and use the full performance of the plug-in.

This is the perfect glue for mixing and mastering.

Regular price $149 on sale for only $49.

Mu

Echorec

Binson Echorec is a delay plug-in that emulates the Binson Echorec used in the sounds of Pink Floyd, The Shadows, Jimmy Page, and many other bands in the 70s.

It features saturation, oscillation, and overdrive.

The modeling is very thorough, coming from three different units with different conditions.

  • Authentic tube sound
  • Accurate modeling of complex processes in Echorec disks, including magnetic saturation and hysteresis
  • Stereo drift
  • Creative pitch modulation, wah and flutter effects on delayed signals
  • Emulate three truly amazing aircraft from 50 years of vintage equipment
  • Color of delayed signal and off mode to reproduce grit without delay

Regular price $99 on sale for only $29.

Echorec

Smasher

This is an extreme compressor modeled after the “British mode” (pressing all four RATIO buttons) of the 1176 compressor.

Topology Preservation Technology

Pulsar’s proprietary modelling technology guarantees a perfect emulation of the original 1176’s behaviour. From the saturation of the magnetic flux in the inductors to the precise response of the transistors and the tiny calibration effects, everything is perfectly reproduced.

Low CPU Consumption

Pulsar have spent ages optimizing Smasher to consume as few system resources as possible while keeping the same complex sonic results. Smasher takes full advantage of modern CPUs to do more with less but also allows oversampling at rates up to 384kHz.

Parallel Compression

Smasher’s Mix knob lets you blend in the original unprocessed signal. This means that you can really squash the transients with extreme compression, then bring back just a hint of the processed signal to add sustain to a sound without compromising its dynamic qualities.

Linked Sidechain

On a stereo bus, channels are usually compressed independently to get smoother control of dynamics… but when you’re compressing audio more brutally, it’s essential to keep the stereo image stable. That’s why Smasher uses a single detector to process a stereo track.

Optimized for low CPU usage.

Regular price $49 on sale for only $19.

Smasher

Related sales

Pulsar Audio Pre-Black Friday Sale